STEAM CHAMBER :

The machine is fitted with a steam chamber and guide frames which adds moisture in dry fabric in a entry point.

'J' BOX : 

The fabric rests in 'J' box few seconds before being feeded into the treatment chamber, Because of the steam the fiber gets soft and the rest at 'J' box enables the fabric to absorb moisture to each core of the fiber.

ENTRY POINT :

At entry point the fabric is guided into the treatment chamber with an adjustable structure to give required width to the fabric.

TREATMENT CHAMBER :

Treatment Chamber above the entry point sis designed in such a way that it thermosets the fabric in such a form. The in built blower also helps in spreading heat in the chamber and fabric comes out of the chamber properly thermosetted (which is a must for all synthetic & blended fabrics.)

STEEL ROLLER :

The Steel Roller fitted on the top of the treatment chamber presses the thermosetted fabric to give a fine finish , the conveyer then carries the fabric to cooling device.

COOLING CHAMBER :

The Cooling chamber fitted with a blower cools the fabric as it comes out of the treatment chamber. This Process not only absorbs the heat from the fabric but also prevents the change of color which may occur if fabric remains hot for sometime.

TROLLEY :

The moving trolley fitted with adjustable electric device gives an even fold to the fabric and keeps the finished width intact.